BOXSEAT

Home › Blog › Setup & fixes

Setup & fixes

How much internet speed do you need for streaming?

Simple numbers for HD, 4K and live TV, a quick way to add up your whole house, and the Wi-Fi fixes that often matter more than a faster plan.

Most homes need less internet speed for streaming than they think, but they need it to arrive steadily at the TV. The FCC's speed guide lists 5 to 8 Mbps for HD video and 25 Mbps for 4K, one activity at a time. Live TV is the pickiest, so plan on about 10 Mbps for each screen playing live and 25 Mbps or more for 4K. Add up every screen and device in your house, leave some headroom, and then make sure your Wi-Fi actually gets that speed to the TV.

Internet speed for streaming: the quick answer

Plan on 5 to 10 Mbps for each HD screen, about 10 Mbps for each screen playing live TV, and 25 Mbps or more for each 4K screen. The first column below is what the FCC's Broadband Speed Guide lists as the minimum download speed for each activity on its own. The second column is our planning number, rounded up because real homes have walls, busy evenings and more than one thing going at once.

What you're doing (one screen or device) FCC minimum download Plan for
Streaming standard definition (SD) video 3 to 4 Mbps 5 Mbps
Streaming HD movies and shows (on demand) 5 to 8 Mbps 8 to 10 Mbps
Live TV in HD Not listed separately 10 Mbps
Streaming 4K (Ultra HD), live or on demand 25 Mbps 25 Mbps or more
HD video call 1.5 Mbps (personal call), 6 Mbps (HD video conferencing) 6 Mbps
Online multiplayer gaming 4 Mbps 5 Mbps
Browsing, email, social media 1 Mbps 1 to 2 Mbps
Working or schooling from home 5 to 25 Mbps 25 Mbps

The FCC's own note on that guide is worth repeating: its numbers are rough guidelines, they're based on running one activity at a time, and extra speed may improve performance. In other words, those are floors, not targets.

If you watch on BoxSeat, our numbers match the "Plan for" column: at least 10 Mbps for each screen playing live TV, and 25 Mbps or more for the smoothest picture and for 4K channels.

The magic number isn't your plan's speed. It's the speed that reaches the TV, at the time you watch, with everyone else in the house online.

How to add up what your whole house needs

Add each screen and device that's busy at the same time, then add about half again as headroom. That gives you a household number you can compare with your internet plan and with a speed test on your TV.

The FCC also publishes a Household Broadband Guide that sorts homes by how many devices are online at once and how heavy the use is. "Moderate use" there means basic browsing plus one demanding thing, like streaming HD video, online gaming or a video meeting. "High use" means more than one of those at the same time.

Devices online at once Light use Moderate use High use
1 Basic Basic Medium
2 Basic Medium Medium or Advanced
3 Medium Medium Advanced
4 Medium Advanced Advanced

In that guide, Basic is 3 to 8 Mbps, Medium is 12 to 25 Mbps, and Advanced is more than 25 Mbps. That's a handy sanity check, but a home with one 4K TV and two other streams needs a lot more than 26 Mbps. Here's a back-of-the-envelope calculator:

  1. List every screen that might play video at the same time. Count TVs, tablets, phones and computers. Use 10 Mbps for each live or HD screen and 25 Mbps for each 4K screen.
  2. Add video calls and gaming. Use 6 Mbps for each HD video call and 5 Mbps for each online game.
  3. Add a little for everything else. Phones checking email, smart speakers, laptops browsing: 1 to 2 Mbps each is plenty.
  4. Add headroom. Multiply your total by 1.5. Wi-Fi loses speed through walls, evenings get busy, and something always starts a big download at the worst moment.
  5. Compare. Your plan's typical download speed (more on "typical" below) should be at or above that number, and each TV should pass its own share on a speed test run on the TV. That last part is where most homes trip up.

A worked example: two live TVs, a phone and a game console

Picture a busy Sunday. Live sports are on in 4K in the living room, the news is on in the bedroom, someone is watching a show on their phone, and a teenager is playing an online game.

Device What it's doing Speed to plan for
Living room TV Live sports in 4K 25 Mbps
Bedroom TV Live news in HD 10 Mbps
Phone HD show, on demand 8 Mbps
Game console Online multiplayer 4 Mbps
Everything else Phones, a laptop, smart speakers 3 Mbps
Subtotal 50 Mbps
With headroom (x 1.5) 75 Mbps

So this home wants a plan whose typical download speed is comfortably above 75 Mbps. Something around 100 Mbps fits, with room for a video call to join in.

The plan is only half the answer, though. The living room TV needs 25 Mbps or more on its own speed test, and the bedroom TV needs at least 10. If the living room TV tests at 18 Mbps over Wi-Fi on a 300 Mbps plan, paying for a faster plan won't fix it. A cable, a better router spot, or a mesh Wi-Fi point near that TV will.

One more thing to watch: the game console. Playing online uses little, but a big game download or update takes all the speed it can get, so set those to run overnight.

Live TV is the toughest test for your internet

Live TV needs steady speed more than high speed, because it plays as it happens. If your connection dips for a few seconds, a live channel has very little stored up to cover the gap, so the picture freezes or drops in quality.

Movies and shows on demand load ahead while you watch, so a short slowdown gets absorbed before you see it. That's why a movie can play fine on the same internet where a live game keeps stalling.

It's also why a speed test's best number can fool you. A connection that swings between 80 Mbps and 4 Mbps looks great on paper and still freezes during a game. A steady 30 Mbps all evening will usually play live TV better.

Delay matters too. The FCC's broadband label glossary describes latency (often called lag, measured in milliseconds) and notes it can cause noticeable delays with streaming video, live audio and online games. Lower is better, and latency that jumps when the house gets busy is a sign your network is struggling.

For live TV, a steady speed beats a fast peak. Test at the time you actually watch, and judge your connection by its lowest result, not its best.

Mbps vs MB/s, download vs upload: reading the numbers

Speed tests and internet plans use megabits per second (Mbps). Downloads on a computer or game console often show megabytes per second (MB/s), which is a number eight times smaller for the same speed.

Mbps vs MB/s

The FCC's label glossary puts it simply: a byte is made up of eight bits, and a megabit is a million bits. So to turn Mbps into MB/s, divide by 8.

Speed in Mbps (plans and speed tests) Same speed in MB/s (download screens)
10 Mbps 1.25 MB/s
25 Mbps about 3 MB/s
100 Mbps 12.5 MB/s
300 Mbps 37.5 MB/s

If your console says a download is running at 12 MB/s, that's roughly 100 Mbps. Your internet isn't slow; the units just changed.

Download vs upload

Download is data coming to you, like a TV channel or a movie. Upload is data you send out, like your side of a video call. Streaming TV is almost all download, so the download number is the one to compare with the tables above.

The FCC notes that home internet typically runs faster down than up. Upload matters for video calls, security cameras and doorbells that send video out, photo backups, and going live yourself. The FCC's glossary also warns that low upload speeds can make it hard for several people to work or learn from home at once.

Data caps

Some plans include a set amount of data each month before extra fees or slower speeds kick in, and the FCC's broadband label shows that amount for each plan. As a ceiling, a steady 10 Mbps for an hour moves about 4.5 GB, and 25 Mbps about 11 GB, so a cap is worth checking if your family streams a lot.

Why your TV doesn't get the "up to" speed on your bill

Your plan's speed is for your whole home's connection, and it's shared by everything you own. By the time it travels over Wi-Fi, through a couple of walls, to a TV that's also competing with phones and laptops, the TV gets a fraction of it.

Internet providers have to show an FCC broadband label for each plan they sell. According to the FCC's glossary, those labels list typical download and upload speeds, which aren't always the same as the advertised speed. The glossary adds that you may not see those speeds on a speed test on your phone or another device, and that the number of devices in your home can affect the speed any one device gets.

Here's where the speed usually goes:

  • Sharing. Every phone, tablet, camera and console takes a slice.
  • Wi-Fi distance and walls. Wi-Fi weakens with every wall, floor and cabinet between the router and the TV.
  • The wrong Wi-Fi band. A TV stuck on 2.4 GHz is often far slower than the same TV on 5 GHz.
  • Older hardware. Some TVs and boxes can't use all of a fast plan. That's often fine: a TV needs its share, steadily, not hundreds of Mbps.
  • Busy times. Speeds can change through the day, which is why you test when you actually watch.

Two kinds of connection need a special mention. The FCC's Getting Broadband Q&A notes that mobile wireless broadband is typically slower than wired or fixed wireless service, and that satellite internet can be disrupted in extreme weather. If either is your home internet, live TV is where you'll notice it first.

How to run a speed test on your TV (not your phone)

Run the test on the TV, or on the streaming box or stick plugged into it, because that's the device that has to play the picture. Your phone is a fine first check that the internet is working at all, but it may be sitting closer to the router, on a faster Wi-Fi band, or on cell data.

  1. Pick the right time. Test when you usually watch, like a weeknight evening or game time on the weekend. A quiet morning tells you little about Sunday night.
  2. Leave the TV where it lives. Use the same connection you watch on, Wi-Fi or cable, and don't move the box closer to the router.
  3. Look for a built-in test. Open your TV's or box's Settings, then Network (on some models it's called Network & Internet). Many TVs and boxes have a network status, connection test or speed test there. Some only show signal strength; one or two bars is still a useful clue.
  4. No built-in test? Use an app. Install a free speed-test app from your TV's app store, or open a speed-test website in the TV's web browser if it has one.
  5. Run it three times. Wait a minute between runs. Write down the download speed in Mbps each time, plus ping or latency if it shows.
  6. Keep the lowest number. Live TV lives with your worst moments, not your best.
  7. Compare. You want at least 10 Mbps for a live HD screen and 25 Mbps or more for 4K. If the TV falls short while a phone right next to the router does fine, the trouble is the Wi-Fi path to the TV, not your plan.

One more clue: pause everything else and test the TV again. The gap shows how much the rest of the house uses.

Wi-Fi vs Ethernet for streaming

An Ethernet cable is the steadiest way to connect a TV, and steadiness is what live TV needs. If a cable isn't practical, 5 GHz Wi-Fi with the router out in the open is the next best thing.

Ethernet cable vs Wi-Fi: the real speed difference

The biggest Ethernet vs Wi-Fi speed difference isn't the top number, it's the consistency. A cable doesn't lose speed through walls or fight with your microwave and your neighbors' Wi-Fi, so the TV gets close to what the router receives, minute after minute.

Many TVs and streaming boxes have an Ethernet port on the back. Many small sticks don't, but some work with an Ethernet adapter made for that stick, so check your model. If the router is in another room, a long flat cable along the baseboard is cheap and works.

2.4 GHz vs 5 GHz Wi-Fi

Most routers broadcast two bands. 2.4 GHz reaches farther and gets through walls better, but it's slower and more crowded, because so many gadgets and neighbors use it. 5 GHz is faster and less crowded, but it fades sooner with distance and walls.

For a TV in the same room as the router or one room away, 5 GHz is usually the better choice. If your router shows both as one network name, the TV may pick 2.4 GHz on its own. Many routers let you give the 5 GHz band its own name so you can point the TV at it.

Where to put your router

Placement is free, and it can matter as much as your plan.

  • Central and high. Put it near the middle of the home, on a shelf or table, not on the floor.
  • Out in the open. Not inside a cabinet, behind the TV, or in a closet.
  • Away from interference. Keep it away from microwaves, cordless phone bases, big metal objects and fish tanks.
  • Close to the TV that matters most. If the main TV is where the live sports happen, move the router toward it, or run a cable.

Mesh Wi-Fi and extenders

Mesh Wi-Fi for streaming makes sense in bigger homes, homes with several floors, or anywhere a TV sits far from the router. A mesh system uses two or more units that work as one network, so a far-off TV connects to a nearby unit instead of a distant router.

Place each mesh unit about halfway between the router and the dead zone, not inside the dead zone. If you can link the units with Ethernet (often called wired backhaul), they'll pass along more of your speed. A basic Wi-Fi extender can help in a pinch, but many simple ones repeat on the same channel they listen on, which can cut the speed they pass along.

Best router for streaming: what to look for

You don't need a router with antennas like a spider. For streaming, a few plain features matter, whatever the brand.

  • Wi-Fi 6 or newer. It handles many devices at once better than older Wi-Fi, which is what a house full of phones and TVs needs.
  • Dual-band or better. It must have 5 GHz, ideally with the option to name it separately.
  • Ethernet ports. At least a few, so you can wire the TVs or boxes closest to the router.
  • Mesh support. If your home is large or has several floors, a router that can add mesh units later saves you from starting over.
  • Easy settings and updates. A simple app or settings page that shows connected devices and installs updates.

Looking for the best router for streaming on multiple TVs? The router matters less than how each TV connects. Wire the TVs you can, put the rest on 5 GHz, and add a mesh unit near any TV that tests below its share.

If your router is years old or has no 5 GHz band, a newer one often fixes more buffering than a faster plan.

Upgrade the plan or the router? A simple test

Test right next to the router, then test on the TV. The two numbers tell you where the problem lives.

What you see What it usually means Try this first
Slow even right next to the router The line, the modem or the plan Restart the modem and router; if it's still slow, call your provider
Fast next to the router, slow at the TV Wi-Fi isn't reaching the TV well Ethernet, 5 GHz, move the router, or add mesh
Fine when the house is quiet, slow when everyone's on Your house needs more than your plan Use the calculator above; a bigger plan may be the answer
Movies fine, only live TV freezes Speed is uneven, not too low Fix the Wi-Fi path, and test at watch time
Only one channel misbehaves Probably that channel, not your internet Try another channel to compare

For the near-router test, a laptop plugged in with a cable is best, but a phone right next to the router on 5 GHz works too.

Before you buy anything, unplug the router (and the modem, if it's separate) for 30 seconds, plug it back in, and give it a couple of minutes to settle. It's the oldest fix in the book because it still works.

What BoxSeat needs from your internet

BoxSeat needs at least 10 Mbps for each screen playing live TV, and 25 Mbps or more for the smoothest picture and for 4K channels. An Ethernet cable or 5 GHz Wi-Fi on the TV helps the most.

On BoxSeat Internet to plan for
Live TV on one screen At least 10 Mbps
Smoothest picture, or a 4K channel 25 Mbps or more
Movies and series Less fussy, because they load ahead while you watch
Best connection for the TV Ethernet cable, or 5 GHz Wi-Fi

A BoxSeat Pass plays on one screen at a time. So on one Pass, BoxSeat only ever needs one screen's worth of your internet: 10 Mbps, or 25 Mbps or more for 4K. In the worked example above, only one of those two TVs would be playing on a single Pass at any moment. To switch rooms, stop in one and press play in the other.

On phone data, speed depends on your signal and how busy your carrier's network is, so live TV can stutter even when movies play fine. Switching the phone to Wi-Fi tells you quickly whether the data connection is the cause. Your home internet and Wi-Fi are outside our control, but the tips in this post are what we'd try first.

If the picture freezes, the buffering guide walks through the fixes in order; most of the time the first two do it. For the reasons behind each fix, read why your stream keeps buffering. Still stuck? Open a ticket at getboxseat.com/support, and a real person reads it.

BoxSeat TV runs on Google TV and Android TV devices, Fire TV models that can install apps from outside Amazon's store, and NVIDIA Shield, and there's a BoxSeat app for Android phones. Not sure what your TV runs? Which TV do I have? takes about a minute, and everything else is on the app page.

The short version

Add up the screens that play at the same time: about 10 Mbps for each live or HD screen, 25 Mbps or more for each 4K screen, a little for calls and games, and half again for headroom. Then test on the TV, at the time you watch, and keep the lowest result.

If the TV comes up short while the router end is fine, fix the path first: a cable, 5 GHz, a better router spot or a mesh unit. Pay for a bigger plan only when the whole house adds up to more than you have.

Get that right and live TV just plays. BoxSeat brings live TV, sports, movies and series to your TV, phone and computer, and your internet is now ready for the best seat in the house. Thinking about dropping cable altogether? Start with how to watch TV without cable.

Questions people ask

How many Mbps do I need for streaming TV?

The FCC's speed guide lists 5 to 8 Mbps for streaming HD video and 25 Mbps for 4K, for one activity at a time. Live TV is less forgiving, so plan on about 10 Mbps for each screen playing live in HD and 25 Mbps or more for 4K. Then add up every screen and device in the house and leave some headroom.

How much internet speed do I need for a 4K TV?

Plan on at least 25 Mbps reaching that TV, which matches the FCC's figure for streaming Ultra HD 4K video. That's the TV's share alone, so the whole home plan needs more if other people are online too. Run the speed test on the TV itself, and use an Ethernet cable or 5 GHz Wi-Fi if you can.

What internet speed do I need for streaming live TV?

About 10 Mbps for each screen playing live TV, and 25 Mbps or more for the smoothest picture and for 4K channels. Live TV plays as it happens, so steady speed matters more than a high peak. If your speed dips during the evening, live channels feel it first.

Is Ethernet faster than Wi-Fi for streaming?

Usually, and more importantly it's steadier. A cable doesn't lose speed through walls or fight with your neighbors' Wi-Fi, so the TV gets close to what your router receives. If a cable isn't practical, 5 GHz Wi-Fi with the router in the open is the next best thing.

Should I run a speed test on my phone or my TV?

On the TV, or the box or stick plugged into it. Your phone may be closer to the router, on a different Wi-Fi band, or on cell data, so its number can look great while the TV struggles. Test at the time you usually watch and write down the lowest of three results.

Is upload or download speed more important for streaming?

Download. Watching TV, movies and shows pulls data down to your screen, so the download number is the one to compare. Upload matters for video calls, security cameras that send video out, and going live yourself.

Is 25 Mbps or 100 Mbps enough for streaming?

A steady 25 Mbps is enough for one 4K screen or two live HD screens, with little room for anything else. Around 100 Mbps comfortably covers most homes with a few screens, a game console and video calls, as long as your Wi-Fi delivers it to each TV. Use the calculator in this post to check your own house.

Do I need a new router or a faster internet plan?

Test right next to the router first. If that number is close to what your plan promises but the TV is slow, the Wi-Fi is the problem and a better router spot, a cable or mesh Wi-Fi will help more than a bigger plan. If the speed is low even next to the router, or your house simply adds up to more than your plan, talk to your provider.

Grab your seat.

Live TV, sports, movies and series on your TV, phone and computer. Prepaid, no card on file, and it never renews on its own.

See BoxSeatGet the app

Keep reading